-
Embedded Processors for Industrial Applications
-
Companion Power Selection Guide: Blackfin & SHARC Processors
-
Power Regulation and
Supervisory Selection Guide -
Motor and Power Control Brochure (pdf)
UPS
UPS
UPS systems, or advanced power supplies, represent conversions from AC to DC and DC to AC. Typical UPS systems are utilized to minimize the impact of blackouts and to strengthen the quality of the supplied power/voltage.
Amp/DAC/ADC
- AD8221: Precision Instrumentation Amplifier»
- AD629: High Common-Mode Voltage
Difference Amplifier» - AD977: 16-Bit, 100 kSPS, Serial I/O Analog-
to-Digital Converter» - AD7663: 16-Bit, Bipolar, 250 kSPS PulSAR� CMOS ADC»
Isolated Gate Driver/Switch Inverter
- ADuM7234: Isolated, Precision Half-Bridge Driver, 4 A Output»
- ADuM5230: Isolated Half-Bridge Driver with Integrated High-Side Supply»
- ADuM3220: 4 A Dual-Channel Gate Driver»
- ADuM6132: Isolated Half-Bridge Driver with Integrated Isolated High-Side Supply»
ADC
- AD7656-1: 250 kSPS, 6-Channel, Simultaneous Sampling, Bipolar, 16-Bit ADC»
- AD7606-6: 6-Channel DAS with 16-Bit,
Bipolar, Simultaneous Sampling ADC» - AD7262: 1 MSPS, 12-Bit, Simultaneous Sampling SAR ADC with PGA and Four Comparators»
- AD7866: Dual, 1 MSPS, 12-Bit, 2-Channel
SAR ADC with Serial Interface»
ADC
- AD7400: Isolated Sigma-Delta Modulator»
- AD7401: Isolated Sigma-Delta Modulator»
- AD7656-1: 250 kSPS, 6-Channel, Simultaneous Sampling, Bipolar, 16-Bit ADC»
- AD7606-6: 6-Channel DAS with 16-Bit,
Bipolar, Simultaneous Sampling ADC»
Isolation
Digital or Analog Input/Output
- AD977: 16-Bit, 100 kSPS, Serial I/O Analog-
to-Digital Converter» - AD7663: 16-Bit, Bipolar, 250 kSPS PulSAR� CMOS ADC»
Processor
- ADuC706x: Analog Microcontroller»
- ADSP-BF506F: Blackfin� Processor with Executable Flash, ADC, and Optimized Peripheral Set for Industrial and General-Purpose Applications»
- ADSP-2148x: SHARC� DSP»
- ADSP-2147x: SHARC� DSP»
RS-232/RS-485/CAN Isolated or Nonisolated
- ADM2484E: 5 kV Signal Isolated, ESD Protected, 500 kbps, Full/Half Duplex RS-485 Transceiver»
- ADM2582E: 2.5 kV Signal and Power
Isolated, �15 kV ESD Protected, Full/Half Duplex RS-485 Transceiver (16 Mbps)» - ADM2491E: 5 kV Signal Isolated, High Speed (16 Mbps), ESD Protected, Full/Half Duplex RS-485 Transceiver»
- ADM485: 5 V, Low Power, 5 Mbps, Half
Duplex EIA RS-485 Transceiver»
Power and Support
- Use ADIsimPower for fast, accurate DC-DC power management design»
- View our power management portfolio»
UPS SYSTEM DIAGRAM
Hover over the blue blocks to view ADI product recommendations. Click a part number to access the product page.
SELECT A PRODUCT
- Isolated/Shunt Modulators
- Non-Isolated/Transformer (Bipolar)
- Non-Isolated/Transformer (Unipolar)
- Supply Side
- Low Side
- Level Shifting
- Command Input
FEEDBACK & SENSING
Current/Voltage Sensing
Analog Input
- Digital Isolators
- Isolated Gate Drivers
ISOLATION
- Ethernet IEEE 1588
- CAN Controller
- USB Controller
- UART
- Isolated RS-485/422
- Non-Isolated RS-485/422
- Isolated RS-232
- Non-Isolated RS-232
- Isolated USB
COMMUNICATIONS
Embedded Controllers
Physical Layer Devices
RESOURCES & RELATED INFORMATION
Technical Articles
Learning Resources
Circuits from the Lab Reference Circuits
- 500 V Common-Mode Voltage Current Monitor
- Low Cost, Level Shifted Low Side Current Monitor for Negative High Voltage Rails
- Robust, Multivoltage, High Efficiency, 25 W Universal Power Supply Module with 6 V to 14 V Input
- A Novel Analog-to-Analog Isolator Using an Isolated Sigma-Delta Modulator, Isolated DC-to-DC Converter, and Active Filter
- More Circuits from the Lab
